成人社区一二三无码视频,91在线无码精品国产阿朱,国产AV高清不卡,一本色道久久亚洲,蜜臀久久精品久久久久

performance

1. The driving bottom roller, gluing roller, control rubber roller and return scraping roller are rotated by independent motors. The rotation is stable and the glue is evenly applied. During the rotation process, there will be no rack stripes caused by the chain drive
2. The diameter of the rubber roller is 240mm, and the rubber material is imported silicone material, which is high temperature resistant. The diameter of the rubber steel roller is 240mm. It uses a ceramic roller, which has high glue control accuracy and durability.
3. The inner space width of the gluing machine is 1514mm, the effective working width of the gluing rubber roller and the gluing steel roller is 1350mm, and the effective working width of the bottom roller is 1300. To stick to substrates below 1mm, a special bottom roller must be used.
4. Both the rubber coating roller and the rubber-controlling ceramic roller are through-shafts, and the roller body structure is a double-gallbladder seamless steel roller. The single-side wall thickness of the inner bladder is 12mm, and the wall thickness of the outer bladder is 16mm. It is solid and does not deform; the double-gallery structure It is conducive to the circulation of heat transfer oil, and the built-in heating tube is used for heating, so that the temperature error of the roller surface is controlled within ±1°C.
5. The front and rear glue cleaning equipment is equipped with a flip conveyor row. After the equipment work is completed, the front and rear conveyors can be turned vertically 90 degrees to facilitate workers to enter and clean the excess glue from the glue head, and then use media to seal the glue mouth to avoid glue in the cutter head. Curing in contact with air.
6. PLC centralized control. Except for the bottom roller, each roller is controlled by an independent motor reducer and frequency converter, and is accurately controlled by PLC, making the glue coating uniform and easy to operate.